Skip to main content
Log in
Schneider Electric DPER35 — Overload Relays

Schneider Electric DPER35 Easy TeSys Thermal Overload Relay,

MPNDPER35
Active

Schneider Electric Easy TeSys DPER, thermal overload relay, 30-38 A, Class 10, 1 NO + 1 NC auxiliary contacts, IP20.

Schneider Electric DPER35 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DPER35 — Environmental
ParameterValue
Shock resistance15 gn 11 ms IEC 60068-2-7
DPER35 — Mechanical
ParameterValue
Width1.8 in (45 mm)
Height2.6 in (66 mm)
Depth2.8 in (70 mm)

Product details

The Schneider Electric DPER35 is an Easy TeSys thermal overload relay with a 30...38 A adjustment range and Class 10 trip characteristic per IEC 60947-4-1. The 1 NO + 1 NC auxiliary contact set gives you one normally-open signal for the PLC or status lamp and one normally-closed series link in the contactor coil circuit, which is the conventional way to break the coil on a trip.

Deployment and integration

Mounts directly under a contactor or separately with specific accessories. The screw-clamp terminals accept up to 10 mm² solid or 6 mm² flexible with cable end on the power circuit. Phase-failure sensitivity is built in: the relay trips at 130 % of Ir on two phases when the third is at zero, so a lost phase on a conveyor motor will not go unnoticed.

Sourcing takeaway

This is an active, standard-catalogue part from the Easy TeSys range. For a BOM line specifying DPER35, the fit is confirmed by the 30-38 A range and Class 10 trip curve.

Frequently asked questions

What is the closest alternative to DPER35 in the Easy TeSys family?

The DPER35 is part of the Easy TeSys DPER series. Within the same family, the closest alternative would be a DPER relay with a different adjustment range — for example, a DPER32 for 23-32 A or DPER38 for 37-50 A — but these are not pin-compatible; the mounting and terminal layout are shared, but the current range must match the motor FLA.

What compliance documentation does Schneider provide for DPER35?

The DPER35 is certified to UL 60947-4-1, UL 60947-5-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1. These standards cover the product safety and performance requirements for North American and European markets. RoHS and REACH compliance is standard for current-production Schneider Easy TeSys products.

MPN
DPER35