The ENW13268 is a Schneider Electric EasyPact NW switch disconnector, 3 poles, rated 1250 A in AC-23A utilisation category at 440 V AC. That AC-23A rating means it handles motor loads with occasional overloads — switching, not just isolating — so it's sized for distribution and motor feeder duty in industrial panels. Drawout mounting on a rail base plate lets you rack the unit out for maintenance without unbolting bus connections, which cuts downtime on a line changeover.
Drawout mounting on a rail base plate, rear connection, vertical or horizontal orientation. Connection pitch is 70 mm without a spreader. The 277 mm depth, 288 mm width, and 322 mm height fit standard switchgear cubicle compartments. IP30 finger protection on the enclosure; inside a locked cabinet that's sufficient.
Rated insulation voltage 1000 V AC, impulse withstand 12 kV. Short-time withstand 50 kA for 1 second at 220–440 V; making capacity 75 kA at the same voltage range. That 50 kA Icw means it coordinates with upstream breakers rated for that fault level without needing a separate current-limiting fuse. The 5000-cycle electrical durability at 440 V AC-23A and 20000-cycle mechanical durability (with maintenance) give a realistic service life for a distribution disconnector that sees infrequent switching.
Suitability for isolation confirmed per IEC 60947-3, with a visible contact position indicator. Standards compliance to IEC 60947-3 covers the switching and isolation performance. Network frequency 50/60 Hz, so it works on either without derating.