Skip to main content
Schneider Electric ENW13282

Schneider Electric ENW13282 EasyPact NW Switch Disconnector,

MPN ENW13282
Active

Schneider Electric EasyPact NW, switch disconnector, 3P, 1600 A AC-23A, drawout, IEC 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13282 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1600 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C without control unit

All specifications

ENW13282 additional specifications
ParameterValue
Pollution degreeclass 3
Depth277 mm
Width358 mm
Height322 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW13282 is a 3-pole switch disconnector from the Schneider Electric EasyPact NW range, rated for 1600 A in AC-23A duty at 440 V AC. The drawout mounting lets you rack the unit out for maintenance or replacement without disturbing the main bus connections — a real time-saver in switchgear where uptime matters.

The headline number is 1600 A at 440 V in AC-23A — that's the motor-switching rating, not a resistive-heater rating. If your load is a 1600 A motor starter feeder or a distribution main with motor-heavy downstream, this is the right curve. The short-time withstand (Icw) is 50 kA for 1 second at 220–440 V, and the making capacity (Icm) is 75 kA at the same voltage range. That tells you the switch can survive a bolted fault and close onto a short without welding contacts — critical for selectivity in a distribution panel. IP30 protection on the switch itself is typical for enclosed switchgear — the enclosure provides the higher IP.

MPN
ENW13282