The Schneider Electric ENW21513 is a closing coil in the EasyPact NW range, electrically operated with a maintained control signal. It's the pull-in component for the XF drawout circuit breaker — the coil that closes the main contacts when energized. Rated for 380/480 V AC 50/60 Hz control voltage, it draws 4.5 W / 4.5 VA holding power once sealed.
Drawout mounting and panel integration
This coil mounts in a drawout chassis — the breaker racking mechanism. That means the coil is part of the removable cradle, not the fixed enclosure. For a turnaround planner: the drawout design lets you swap the entire breaker (including this coil) in minutes without unbolting line-side cables. The coil itself is a field-replaceable cartridge inside the cradle; if it fails, you pull the breaker to the disconnected position, release the coil retaining clip, and slide in a replacement. No need to de-energize the bus if the breaker is racked out.
What the control voltage rating means for fit
For a site electrical engineer checking selectivity: this coil is designed for the EasyPact NW drawout breaker family (XF designation). It's not a universal replacement for fixed-mount breakers or other manufacturer's coils. The maintained control signal type means the coil stays energized continuously to keep the breaker closed; a momentary pulse won't hold it. That's standard for closing coils in drawout gear — the control scheme must provide sustained voltage or use a latch-check relay in series.