The ENW24120 is a 4-pole drawout circuit breaker from the EasyPact NW range, rated 1600 A at 40 °C — sized for main incoming or large feeder protection in low-voltage distribution. Its 50 kA Icu at 220…440 V AC (42 kA at 690 V) means it can safely interrupt fault currents up to that level without upstream cascading, per IEC 60947-2. The drawout mounting lets you rack the breaker out for maintenance or replacement without disturbing the bus connections — a standard feature for switchgear where uptime matters.
Drawout mounting on a rail, rear-connected, with a 115 mm connection pitch without spreader. Neutral position is left; the breaker ships with a push-button control type. Physical footprint: 556 mm wide × 439 mm tall × 395 mm deep — verify your cell dimensions before racking.