Skip to main content
Schneider Electric ENW24167

ENW24167 EasyPact NW Switch Disconnector, 1250 A, 3P

MPN ENW24167
Active

Schneider Electric EasyPact NW series, ENW24167 switch disconnector, 3-pole, 1250 A AC-23A, 690 V AC, drawout mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24167 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1250 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24167 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width441 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution — 1250 A, 3-pole, drawout

The Schneider Electric ENW24167 is a 3-pole switch disconnector from the EasyPact NW range, rated 1250 A in AC-23A utilisation category at 690 V AC. That AC-23A rating means it handles switching of motors and other highly inductive loads — not just resistive — so it is specified for distribution panels feeding motor control centres or heavy plant loads. The drawout mounting (withdrawal chassis) lets the switch be racked out for isolation without disturbing the main bus connections, which is the standard arrangement for main incomers or tie-breakers in low-voltage switchgear. The short-time withstand current (Icw) is 50 kA for 1 second, and the short-circuit making capacity (Icm) reaches 105 kA peak at 50/60 Hz — figures that govern selectivity and SCCR coordination in the upstream protective scheme.

Drawout integration and panel fit

Mounting is drawout on a rail support, with rear connection terminals. The connection pitch is 115 mm without spreader, and the device accepts both vertical and horizontal busbar orientations. Overall dimensions: 441 mm wide, 439 mm high, 395 mm deep. The contact position indicator gives a visible break confirmation, and the device is marked as suitable for isolation per IEC 60947-3, which is the requirement for a lockable disconnect means.

MPN
ENW24167