The ENW24177 is a 3-pole switch disconnector from the EasyPact NW range, rated 2000 A in AC-23A utilisation at 690 V AC — that's the heavy motor-switching category (frequent on/off of motors and highly inductive loads), so it's sized for the main incoming or feeder section of a distribution board, not for downstream branch circuits. Short-time withstand current (Icw) is 50 kA for 1 s, 25 kA for 3 s, and the making capacity (Icm) hits 105 kA peak — numbers that matter when coordinating with upstream protective devices for selectivity under fault.
Fixed mounting on a base plate, rear connections with a 115 mm pitch (without spreader). The IP40 enclosure protection means it's for indoor, dry locations — no washdown, no dust. Pollution degree 4 per IEC 60664-1 is the harshest industrial pollution environment (conductive dust, moisture), so the creepage distances are designed for that. Mechanical durability is 20,000 cycles with maintenance, 10,000 without; electrical durability at 690 V AC-23A is 4,000 cycles — that's consistent with a main switch that sees infrequent but high-stress switching.
Listed as an active product. No NRND or phase-out flags.