Schneider Electric ENW24193 EasyPact NW Switch Disconnector,

Name: ENW24193
Brand: Schneider Electric
SKU: ENW24193
Availability: LimitedAvailability
Author: Huaqiang Hank

Specifications

Identification

ENW24193 — Identification
Parameter	Value
Product type	Switch disconnector
Range	EasyPact
Product range	EasyPact NW
Application	Distribution

Electrical ratings

ENW24193 — Electrical ratings
Parameter	Value
Rated operational voltage (Ue)	690 V AC 50/60 Hz conforming to IEC 60947-3
Rated operational current (Ie)	AC-23A: 2000 A AC 50/60 Hz 690 V
Poles	4P
Rated insulation voltage (Ui)	1000 V AC 50/60 Hz conforming to IEC 60947-3
Rated impulse withstand voltage (Uimp)	12 kV conforming to IEC 60947-3
Network type	AC
Network frequency	50/60 Hz
Suitable for isolation	Yes conforming to IEC 60947-3

Breaking & withstand capacity

ENW24193 — Breaking & withstand capacity
Parameter	Value
Rated short-time withstand current (Icw)	50 kA during 1 s conforming to IEC 60947-3 at -5...70 °C 25 kA during 3 s conforming to IEC 60947-3 at -5...70 °C
Rated short-circuit making capacity (Icm)	105 kA AC at 50/60 Hz

Performance

ENW24193 — Performance
Parameter	Value
Mechanical durability (cycles)	20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
Electrical durability (cycles)	AC-23A: 6000 cycles 440 V AC 50/60 Hz without maintenance conforming to IEC 60947-3 AC-23A: 4000 cycles 690 V AC 50/60 Hz without maintenance conforming to IEC 60947-3
Utilisation category	AC-23A

Mechanical & connection

ENW24193 — Mechanical & connection
Parameter	Value
Control type	Push-button
Mounting mode	Fixed
Mounting support	Base plate
Contact position indicator	Yes
Width	537 mm
Height	352 mm
Depth	297 mm
Neutral pole position	Left
Connection pitch	115 mm without spreader
Connection location	Rear

Environmental

ENW24193 — Environmental
Parameter	Value
Operating ambient temperature	-5...70 °C
Storage ambient temperature	-40...85 °C without control unit
IP degree of protection	IP40
Pollution degree	4 conforming to IEC 60664-1

Approvals

ENW24193 — Approvals
Parameter	Value
Standards	IEC 60947-3

Product details

What this switch disconnector delivers

The Schneider Electric ENW24193 is a 4-pole switch disconnector from the EasyPact NW family, rated for 2000 A in AC-23A duty at 690 V AC — that means it handles heavy motor loads and mixed resistive-inductive circuits common in distribution panels, not just simple resistive switching. The AC-23A utilisation category covers occasional switching of motors, transformers, and capacitor banks, so this part is sized for feeder or main disconnect roles where high inrush currents are expected. Rated short-time withstand current is 50 kA for 1 s (25 kA for 3 s) per IEC 60947-3, and short-circuit making capacity reaches 105 kA AC — selectivity and fault-closure capability are built in for high-fault-level installations.

Fixed mounting on a base plate. Rear connection, vertical or horizontal orientation. Neutral on the left. Connection pitch is 115 mm without spreader. Dimensions: 537 mm wide, 352 mm high, 297 mm deep.

Frequently asked questions

Where can I buy ENW24193 and what is the lead time?

This part is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or lead-time number is published here.

What are the key ratings for the ENW24193?

Rated operational current 2000 A in AC-23A at 690 V AC. Short-time withstand current 50 kA for 1 s. Short-circuit making capacity 105 kA AC. Rated impulse withstand voltage 12 kV. Pollution degree 4. IP40 protection.

What compliance documentation does Schneider provide for ENW24193?

The part is designed and tested to IEC 60947-3 for switch-disconnector performance, including isolation suitability. Specific RoHS, REACH, or UL documentation should be requested at RFQ time — the evidence does not list those certificates directly.