Skip to main content
Schneider Electric ENW24262

Schneider Electric ENW24262 EasyPact NW Switch Disconnector,

MPN ENW24262
Active

Schneider Electric EasyPact NW switch disconnector, ENW24262, 1000 A AC-23A, 4 poles, drawout, right neutral, rear connection.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24262 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24262 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW24262 is a 4-pole switch disconnector from the EasyPact NW range, rated for 1000 A in AC-23A duty at 690 V AC. It's certified as a disconnector per IEC 60947-3, so it provides visible isolation when open, with a contact position indicator confirming the state.

Rated operational current is 1000 A at 690 V AC under AC-23A, which covers motor starting and switching of mixed loads. Short-time withstand (Icw) is 50 kA for 1 second or 25 kA for 3 seconds — that tells you the switch can hold closed through a fault long enough for an upstream breaker to clear. Making capacity (Icm) is 105 kA peak, so it can close onto a bolted fault without welding contacts. Rated insulation voltage is 1000 V, impulse withstand 12 kV. These numbers matter for coordination studies: if your fault current exceeds these, the switch isn't the weak link.

This is a drawout-mount switch on a rail support, with rear connection and a connection pitch of 115 mm without spreader. Neutral is on the right. Dimensions: 556 mm wide, 439 mm high, 395 mm deep.

MPN
ENW24262