The ENW24266 is a Schneider Electric EasyPact NW switch disconnector rated for 2500 A in AC-23A duty at 690 V, 50/60 Hz. With a rated short-time withstand of 50 kA for 1 second and a making capacity of 105 kA, it's sized for high-fault-current distribution panels where isolation and load-break capability are both required. It's a 4-pole drawout unit with the neutral on the right, rear-connected, and mounts on a rail. The drawout construction means the main body can be racked out for maintenance or replacement without disturbing the power wiring — a real time-saver in switchgear that sees regular service.
Where it goes and what it handles
This is a distribution-grade switch disconnector for main or feeder isolation in low-voltage switchboards. The IP40 enclosure rating keeps out tools and fingers but won't stop a hose — it's for indoor, clean-ish environments like a motor control center or a main distribution panel. The 395 mm depth, 556 mm width, and 439 mm height mean it needs a real cubicle — this isn't a DIN-rail breaker. Plan for a dedicated compartment with rear-access cabling and enough swing for the drawout mechanism.