Skip to main content
Schneider Electric ENW24275

ENW24275 EasyPact NW Switch Disconnector, 3200 A, 4P

MPN ENW24275
Active

Schneider Electric EasyPact NW switch disconnector, ENW24275, 3200 A AC-23A, 690 V AC, 4 poles, fixed mounting, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24275 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 3200 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24275 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW24275 is a 4-pole switch disconnector from the Schneider Electric EasyPact NW range, rated for 3200 A in AC-23A duty at 690 V AC. It's certified to IEC 60947-3, the standard for switch-disconnectors and load-break switches, and carries a suitability-for-isolation marking, which means it provides visible isolation for safe maintenance access.

Rated short-time withstand current (Icw) is 50 kA for 1 second or 25 kA for 3 seconds — this tells you the switch can hold closed under fault current long enough for an upstream breaker to clear the fault, without welding or failing. The rated short-circuit making capacity (Icm) is 105 kA at AC, meaning it can close onto an existing fault and survive that peak asymmetrical current. Both figures are at the full operating temperature range of -5 to 70 °C. The 4-pole configuration with neutral on the right is fixed — the neutral position is not field-reversible. Connection is rear-mounted, vertical or horizontal orientation, with a 115 mm connection pitch without spreader.

Where this class of part is used

Switch disconnectors of this class serve as the main incoming isolation and load-break device in low-voltage switchboards, motor control centres, and distribution panels. The 3200 A rating places it at the main feeder level for large industrial plants, data centres, or commercial building services where high fault currents and continuous duty are the norm. The continuous duty rating means it's designed to carry rated current indefinitely without derating — not just for occasional switching.

MPN
ENW24275