Skip to main content
Schneider Electric ENW24288

Schneider Electric ENW24288 EasyPact NW Switch Disconnector,

MPN ENW24288
Active

Schneider Electric EasyPact NW switch disconnector, ENW24288, 1600 A AC-23A, 4 poles, fixed mount, IP40, rated insulation voltage 1000 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24288 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1600 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24288 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution duty — 1600 A, AC-23A

The Schneider Electric ENW24288 is a 4-pole switch disconnector from the EasyPact NW range, rated 1600 A in utilisation category AC-23A at 690 V AC. That AC-23A rating means it handles mixed motor and resistive loads with frequent switching — 6000 cycles at 440 V, 4000 cycles at 690 V without maintenance, per IEC 60947-3. It is also certified for isolation (suitability for isolation conforming to IEC 60947-3) with a visible contact position indicator, so it doubles as a service-disconnect for a panel or machine. Rated insulation voltage is 1000 V AC, impulse withstand 12 kV, and short-time withstand current hits 66 kA for 1 s or 36 kA for 3 s. Short-circuit making capacity is 143 kA at 50/60 Hz — numbers that place it in heavy industrial distribution, not light commercial. Pollution degree 4 (IEC 60664-1) confirms it tolerates conductive dust or condensation, typical in unsealed switchrooms.

Fixed base-plate mount, rear connection, neutral on the right. Dimensions: 537 mm wide, 352 mm high, 297 mm deep. Connection pitch is 115 mm without spreader. IP40 enclosure protection — no washdown rating, but fine for indoor switchgear.

MPN
ENW24288