Skip to main content
Schneider Electric ENW24291

ENW24291 EasyPact NW Switch Disconnector, 3200 A, 4 Poles

MPN ENW24291
Active

Schneider Electric EasyPact NW series, ENW24291 switch disconnector, 3200 A AC-23A, 4 poles, right neutral, fixed mount, IP40.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24291 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 3200 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24291 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth297 mm
Width537 mm
Height352 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for high-current distribution

The ENW24291 is a 4-pole switch disconnector from the EasyPact NW range, rated 3200 A in AC-23A duty at 690 V — that is the heavy motor-switching category (frequent on-off of motors and other high-inductive loads), not just resistive break. It is certified as an isolating switch per IEC 60947-3, so it provides visible-break isolation for safe maintenance lockout on the line side of a panel.

Fixed base-plate mount, rear connection, with a horizontal or vertical cable-entry orientation. Neutral is on the right. The 115 mm connection pitch (without spreader) suits standard busbar or cable-lug spacing. Dimensions: 537 mm wide × 352 mm high × 297 mm deep. That depth (297 mm) is the front-to-back envelope — critical for cabinet depth planning when the switch sits on a rear-mounted busbar system.

MPN
ENW24291