Rear connection for EasyPact NW drawout breakers
The Schneider Electric ENW33114 is a rear connection accessory for the EasyPact NW range, designed for 3-pole drawout breakers rated 630 to 1250 A. It mounts at the bottom of the breaker and provides horizontal or vertical rear connection positions. Drawout mounting means the breaker chassis slides into a fixed cradle — the rear connection stays in the panel while the breaker unit is withdrawn for maintenance or swap-out without disturbing power wiring. The 70 mm connection pitch matches standard bus-bar spacing for this class of air circuit breaker. This is a connection accessory, not the breaker itself — it provides the fixed rear terminals that mate with the drawout breaker's primary stabs. For a 3-pole system at 630-1250 A, these connections carry full load current and must be torqued to the manufacturer's specification during installation.
Integration notes
The rear connection mounts to the bottom of the EasyPact NW drawout cradle. Connection pitch is 70 mm between phases. Both horizontal and vertical cable entry orientations are supported, giving panel builders flexibility for bus-bar routing or cable ladder drops. Because this is a drawout system, the rear connection stays fixed to the panel — the breaker unit can be racked out for inspection or replacement without disconnecting power cables. Verify the cradle alignment and stab depth before torquing the rear bus connections.