Skip to main content
Schneider Electric EVS10H3MW5A — Air Circuit Breakers

Schneider Electric EVS10H3MW5A EasyPact EVS Circuit Breaker,

MPNEVS10H3MW5A
Active

Schneider Electric EasyPact EVS, drawout circuit breaker, EVS10H3MW5A, 3P, 1000 A, 65 kA Icu at 440 V AC, electronic trip unit.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

EVS10H3MW5A — Identification
ParameterValue
Product typeCircuit breaker
RangeEasyPact
Product rangeEasyPact EVS
ApplicationDistribution
EVS10H3MW5A — Electrical ratings
ParameterValue
Rated current (In)1000 A at 40 °C
Rated operational voltage (Ue)690 V AC 50/60 Hz conforming to IEC 60947-2
Poles3P
Rated insulation voltage (Ui)1000 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)12 kV conforming to IEC 60947-2
Network typeAC
Network frequency50/60 Hz
Suitable for isolationYes conforming to IEC 60947-2
EVS10H3MW5A — Breaking & withstand capacity
ParameterValue
Rated service breaking capacity (Ics)65 kA (Ics) at 220...440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA (Ics) at 690 V AC 50/60 Hz conforming to IEC 60947-2
Rated short-time withstand current (Icw)65 kA (1 s) at 220...440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA (1 s) at 690 V AC 50/60 Hz conforming to IEC 60947-2 36 kA (3 s) at 440/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated short-circuit making capacity (Icm)143 kA (Icm) at 220...440 V AC 50/60 Hz conforming to IEC 60947-2 105 kA (Icm) at 690 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity65 kA Icu at 220...440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity codeH
EVS10H3MW5A — Performance
ParameterValue
Breaking time, max.25 ms
Closing response time, max.70 ms
Mechanical durability (cycles)20000 cycles (with maintenance) conforming to IEC 60947-2 10000 cycles (without maintenance) conforming to IEC 60947-2
Electrical durability (cycles)Category B: 5000 cycles 440/690 V AC 50/60 Hz without maintenance conforming to IEC 60947-2
Utilisation categoryCategory B
EVS10H3MW5A — Mechanical & connection
ParameterValue
Control typeManually operated
Mounting modeDrawout
Mounting supportRail Base plate
Contact position indicatorYes
Width441 mm
Height439 mm
Depth395 mm
Connection pitch115 mm without spreader
Connection locationRear
EVS10H3MW5A — Environmental
ParameterValue
Operating ambient temperature-5...70 °C
Storage ambient temperature-40...85 °C without control unit -25...85 °C with control unit
IP degree of protectionIP40
Pollution degree4 conforming to IEC 60664-1
EVS10H3MW5A — Approvals
ParameterValue
StandardsIEC 60947-2

Product details

The EVS10H3MW5A is a 3-pole drawout circuit breaker from the Schneider Electric EasyPact EVS range, rated 1000 A at 40 °C and built to IEC 60947-2. The 65 kA Icu at 220...440 V AC and 50 kA Icu at 690 V AC define the maximum fault current it can safely interrupt — critical for coordination studies on distribution switchboards where the available fault current exceeds 50 kA. The electronic trip unit (EVS Trip System5A) provides overload (long-time), short-time, and instantaneous short-circuit protection, with a 20-minute thermal memory that retains heating history before and after a trip event. This matters for motor or transformer feeders where repeated overloads close together would otherwise cause nuisance tripping. Drawout mounting means the breaker chassis stays wired to the bus; the moving portion withdraws for maintenance or replacement without disturbing the primary connections. The rear connection position with a 115 mm pitch without spreader matches standard switchboard busbar spacing — verify the existing busbar centers before specifying.

Frequently asked questions

Where can I buy EVS10H3MW5A and how do I get a price?

The EVS10H3MW5A is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead time.

What is the breaking capacity of EVS10H3MW5A?

The EVS10H3MW5A has a breaking capacity of 65 kA Icu at 220...440 V AC and 50 kA Icu at 690 V AC, both per IEC 60947-2.

What compliance documentation does Schneider Electric provide for EVS10H3MW5A?

The EVS10H3MW5A is certified to IEC 60947-2 and carries suitability for isolation per that standard. For specific RoHS, REACH, or UL documentation, request the compliance package at quote time.

MPN
EVS10H3MW5A