Schneider Electric Easy9 EZ9F53320 miniature circuit breaker, 3-pole, C-curve, 20 A rated current, 3 kA breaking capacity at 400 V AC, thermal-magnetic trip, IP20, clip-on mounting.
| Parameter | Value |
|---|---|
| Product / component type | Miniature circuit-breaker |
| Product range | Easy9 |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Network type (AC/DC) | AC |
| Rated current [In] | 20 A |
| Rated operational voltage [Ue] | 400 V AC 50/60 Hz |
| Rated insulation voltage [Ui] | 500 V AC 50/60 Hz conforming to SANS 60947-2 |
| Rated impulse withstand voltage [Uimp] | 4 kV conforming to SANS 60947-2 |
| Network frequency | 50/60 Hz |
| Magnetic tripping limit | 8.5 x In +/- 20 % |
| Parameter | Value |
|---|---|
| Breaking capacity | 3 kA Icu at 400 V AC 50/60 Hz conforming to SANS 60947-2 |
| Rated service breaking capacity [Ics] | 3 kA 100 % x Icu at 400 V AC 50/60 Hz conforming to SANS 60947-2 |
| Trip unit technology | Thermal-magnetic |
| Suitability for isolation | Yes conforming to SANS 60947-2 |
| Utilisation category | Category A |
| Mechanical durability | 10000 cycles |
| Electrical durability | 4000 cycles |
| Local signalling | Without |
| Contact position indicator | Yes |
| Parameter | Value |
|---|---|
| Connections / terminals | Tunnel type terminal (top or bottom) 1...25 mm² rigid Tunnel type terminal (top or bottom) 1...25 mm² flexible |
| Device short name | Easy9 MCB |
| Control type | Toggle |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Usable 9 mm pitches | 6 |
| Width | 54 mm |
| Height | 81 mm |
| Depth | 66.5 mm |
| Colour | Grey (RAL 7035) |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 conforming to IEC 60529 |
| Pollution degree | 2 |
| Operating ambient air temperature | -5...60 °C |
| Storage ambient air temperature | -40...85 °C |
| Parameter | Value |
|---|---|
| Standards | SANS 60947-2 |
| Parameter | Value |
|---|---|
| Curve code | C |
| Number of protected poles | 3 |
The EZ9F53320 is a Schneider Easy9 miniature circuit breaker with 3 poles, a C-curve trip characteristic, and a 20 A rated current. It breaks 3 kA at 400 V AC and is rated for isolation per SANS 60947-2.
At 20 A, this breaker suits branch circuits feeding lighting or general-purpose loads. The 3 kA breaking capacity at 400 V AC is adequate for most residential and light commercial panels; verify the available fault current at the point of installation.