The Schneider Electric EZEPCON1 is a plug-in connector kit — a set of two connectors that let you wire an Easypact EZC250 or EZCV250 circuit breaker without bolting lugs onto the line/load terminals. It is rated for 250 A and covers 3-pole (3P) breakers in that frame size. The kit mates with the breaker's rear blade terminals, so the breaker can be plugged into a fixed base inside the panel. That means faster swap-out during maintenance — pull the old breaker, push in the replacement, no re-torquing of power connections.
Lifecycle reality — obsolete, but sourced
Schneider has marked the EZEPCON1 as Obsolete.
The 250 A rating matches the EZC250F, EZC250H, EZC250N, EZCV250H, and EZCV250N breakers at their full frame rating. If your breaker is a 250 A frame, this connector set carries the full load without derating the bus. The Performance Level marking H F N refers to the breaking capacity categories of the compatible breakers — H (high), F (standard), N (normal). One connector kit fits all three frame variants; no need to match a specific breaking capacity code. Plug-in mounting means the connector base stays on the DIN rail or panel backplate while the breaker snaps on and off. For a panel builder, that eliminates the torque wrench from the replacement procedure — a real time-saver on a 250 A circuit where lug bolts are normally 20–30 N·m.