Obsolete PacDrive 3 hybrid cable — what's in the lot
The FCE307045A200 is a PacDrive 3 hybrid cable — shielded motor cable, 14.8 ft (4.5 m), terminated with 3 plug-in connectors and one RJ45 on the other end. It was designed for the Stainless LXM62-SC005_16mm servo drive series, carrying both motor power and feedback/encoder signals in a single jacket.
Connector layout and cable construction
Three plug-in connectors handle the motor power phases and brake/thermistor lines; the RJ45 carries the Hiperface DSL encoder feedback. The plastic jacket and shielded construction keep the power conductors isolated from the signal pair inside the same sheath — saves a separate feedback cable run on the machine. 14.8 ft (4.5 m) is a standard length for a motor cable on a medium-frame servo axis — long enough to reach from the drive cabinet to the motor on a typical machine base, short enough to avoid excess capacitance that can trip the drive's output filter.
Sourcing an obsolete PacDrive 3 cable
No official pin-compatible successor is listed by Schneider for this exact hybrid cable. If you're replacing one on a line-down machine, the closest functional match would be another PacDrive 3 hybrid cable with the same connector count and length — verify the connector keying and pinout against the drive and motor before committing.