Hybrid cable for Stainless LXM62-SC005_16mm — 6.5 m reach, shielded, with RJ45 feedback
The FCE307065A200 is a hybrid cable from the PacDrive 3 range, purpose-built for the Stainless LXM62-SC005_16mm servo drive. It combines motor power conductors and feedback/encoder signals in one shielded assembly, eliminating a separate feedback cable run. Cable length is 21.3 ft (6.5 m) — enough to reach from the drive to the motor in most cabinet-to-machine layouts without a junction box or extension. The shield construction is listed as shielded motor cable, so expect a braid or foil over the power conductors plus individual pair shielding for the signal lines. The connector complement is 3 x plug-in (motor phases) plus 1 x RJ45 (encoder/comm). This means one cable carries both the three-phase motor power and the feedback loop, reducing the number of cable entries at the motor and the drive.
Active production — no obsolescence signal
The cable belongs to the PacDrive 3 range, Schneider's integrated motion control platform. If your BOM already uses PacDrive 3 drives and controllers, this cable maintains the same component family for documentation and spares management.
Sourced through independent distribution channels against an RFQ. The cable is a single-unit package (1 per order code), so order the exact quantity the BOM calls out. For volume purchases or blanket orders, the RFQ should include the target quantity and delivery window. The category code US1PC5218353 groups this cable for procurement systems that filter by accessory class.