Encoder cable for PacDrive 3 servo feedback
The FCE311015A200 is a shielded encoder cable from the Schneider Electric PacDrive 3 range, designed to carry position feedback from a detached servo drive to an SH motor. It terminates in an M17 connector on the drive side and an M23 connector on the motor side, with a 1.5 m (4.9 ft) length that suits cabinet-to-machine routing without excess loop.
Connector and construction details
The cable uses metal connector bodies — the M17 and M23 shells are metal, providing the shielding continuity that encoder signals need in electrically noisy drive environments. The shielded cable construction means the braid or foil wrap inside the jacket ties to the connector shells, so the feedback line stays clean of motor-drive EMI. Packaged as a single unit, this is a ready-to-install assembly — no field wiring or crimping. The 1.5 m length is a standard cabinet depth; if the run between the drive and motor is longer, a different FCE3110xx variant would be needed.
Sourcing and lifecycle — active production
Schneider Electric lists this as an active-production item.