Encoder cable for PacDrive 3 servo
The FCE313040A200 is a shielded encoder cable that runs from a detached servo drive to a 40 mm PacDrive 3 motor, terminated with an M17 connector on one end and an S615 connector on the other. At 13.1 ft (4 m), it covers the typical distance between a drive cabinet and the motor in a machine cell — long enough for flexible routing, short enough to avoid signal degradation on the encoder feedback lines.
Shielded pair with metal connectors
The shielded cable construction and metal connector housing mean this assembly is built for electrically noisy environments — the shield ties back to the drive ground through the metal shell, keeping position feedback clean on a servo axis. The M17 connector mates with the drive-side encoder port; the S615 connector locks onto the motor encoder. Both are keyed — no risk of swapping phases on a live axis during commissioning.