10 m shielded cable for PacDrive 3 axes 2 to 4
The FCE319100A100 is a 10 m shielded motor power cable carrying one straight S915 connector, built to feed axes 2, 3, and 4 on the STS40/60/80 servo stack within the PacDrive 3 architecture. It is documented as obsolete, so the field reality is surplus and broker-channel supply rather than live factory runs — exactly the cohort where a confirmed RFQ quote and lot traceability carry the decision.
Connector end, length, and what it physically replaces
The single connector is an S915 in a straight body, so the cable drops straight off the drive or motor bulkhead without a right-angle bend to clear — relevant when the cabinet routing already has tight cable tray turns behind the STS axis. At 10 m the run covers a typical floor-standing machine footprint without an intermediate junction; the shielded construction keeps the motor PWM switching noise out of adjacent signal cables running in the same tray. Package quantity is one, so a multi-axis rebuild of axes 2, 3, and 4 needs three of these cables on the BOM line, not a multi-pack.
Sourcing an obsolete PacDrive 3 cable
With the part marked obsolete, new-build supply routes through independent surplus rather than the franchise line; pricing and available quantities are lot-specific and confirmed at RFQ time against the BOM count for axes 2 through 4.