PacDrive 3 hybrid encoder drop, 15 m
The Schneider Electric FCE320150A100 is a hybrid encoder cable in the PacDrive 3 range, designed for a stainless LXM62-SC005_16mm servo on the motion axis — not a generic spare, the jacket and connector stack are built for that specific stainless-format drive. At 49.2 ft (15 m) the run handles most cabinet-to-axis distances on a packaging or pick-and-place line without needing an inline joiner, and the shielded construction keeps encoder feedback immune to the VFD switching noise that lives one cable tray over.
Connector ends and cable build
One end is a straight S615 connector, the other a straight RJ45 — the RJ45 side lands on the drive's encoder port and the S615 side mates with the motor feedback header, so the cable carries both power-for-feedback and data on the same jacket rather than needing a separate power lead. Metal-bodied connector hardware and a shielded cable jacket give the run the mechanical and EMI robustness expected on a moving axis — the part ships one per package.
Lifecycle — obsolete on the official record
The part is listed as obsolete on the official record — there is no manufacturer-named successor or cross-reference in the data on hand, so a board redesign or a confirmed surplus lot are the realistic paths if a line needs this exact cable.