Skip to main content
Schneider Electric GBX0400121004F — Gear Reducers & Gearboxes

Schneider Electric GBX0400121004F Planetary Gearbox, 12:1

MPNGBX0400121004F
Obsolete

Schneider Electric GBX0400121004F planetary gearbox, straight teeth, 40 mm diameter, 12:1 reduction ratio, 20 N.m continuous output torque, 94% efficiency, 55 dB noise level.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GBX0400121004F — Identification
ParameterValue
Product / component typePlanetary gearbox
Gearbox typeStraight teeth
Compatibility codeGBX
Device short nameGBX
GBX0400121004F — Performance
ParameterValue
Reduction ratio12:1
Output torque, max.283.2 lbf.in (32 N.m) 100 rpm 86 °F (30 °C)
Output torque, continuous177.01 lbf.in (20 N.m) 100 rpm 86 °F (30 °C)
Torsional backlash, max.28 arc.min
Efficiency94 %
Torsional rigidity1.1 N.m/arcmin
Service life30000 h 100 rpm 86 °F (30 °C)
Noise level55 dB 1 m, no-load
GBX0400121004F — Mechanical
ParameterValue
Axial force (Fa), max.200 N 100 rpm, during 10000 hour at 30°C 160 N 100 rpm, during 30000 hour at 30°C
Radial force (Fr), max.200 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C 160 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C
Gearbox outer diameter1.6 in (40 mm)
Housing materialBlack anodized aluminium
Shaft materialC 45
GBX0400121004F — Environmental
ParameterValue
IP protection ratingShaft output IP54
Ambient operating temperature-13...194 °F (-25...90 °C)

Product details

12:1 planetary gearbox — 20 N.m continuous, 32 N.m peak

The GBX0400121004F is a 40 mm diameter planetary gearbox from Schneider Electric's GBX series, with straight-cut teeth and a 12:1 reduction ratio. It delivers 20 N.m continuous output torque at 100 rpm, with a maximum peak of 32 N.m at the same speed — enough margin for short overloads during acceleration or shock loads.

Torque, backlash, and service life at 100 rpm

Rated for 30,000 hours service life at 100 rpm and 30 °C ambient, the gearbox is lubricated for life — no oil changes, no breather vent to maintain. Torsional backlash is 28 arc.min maximum, which matters for positioning accuracy in indexing or start-stop applications; if your motion profile requires tighter repeatability, this figure sets the floor. Maximum radial force at mid-shaft is 160 N for the full 30,000-hour life, or 200 N if you accept a 10,000-hour service interval. Axial force limits follow the same derating curve: 160 N for 30,000 hours, 200 N for 10,000 hours. Overhang loads from pulleys or pinions must stay within these bounds to avoid bearing wear that shortens life below the rating.

Efficiency, noise, and environmental sealing

At 94 % efficiency, the gearbox loses about 6 % of input power as heat — roughly 1.3 W at the continuous torque rating, which the anodised aluminium housing dissipates without a fan. Noise measures 55 dB at 1 m, no-load, which is quiet enough for lab or office-adjacent equipment without an acoustic enclosure. Shaft output sealing is IP54, meaning dust-protected and splash-resistant at the output shaft — suitable for dry indoor environments but not washdown. The housing is black anodised aluminium, shaft is C45 carbon steel. Ambient operating range is -25 to 90 °C, covering most industrial enclosures and outdoor cabinets in temperate climates.

Obsolete — sourcing through independent channels

Schneider Electric lists the GBX0400121004F as obsolete. No official successor or cross-reference is published. Quantities are confirmed at RFQ; no minimum order is assumed.

Frequently asked questions

What is the continuous torque rating of GBX0400121004F?

20 N.m (177 lbf.in) at 100 rpm and 30 °C ambient. Peak torque is 32 N.m (283 lbf.in) under the same conditions. Both figures assume the gearbox is mounted with adequate heat sinking through the 40 mm housing.

MPN
GBX0400121004F