Obsolete — sourcing through independent channels
The GBX0400151403F: Available through independent surplus and broker channels. Quantities are lot-specific; availability and pricing confirmed at RFQ against your BOM quantity.
Planetary gearbox with a 15:1 reduction ratio, 40 mm diameter, straight teeth. Continuous output torque is 18 N.m at 100 rpm and 30 °C; maximum output torque reaches 29 N.m under the same conditions — the continuous figure governs steady-state duty, the maximum covers peak loads during acceleration or momentary overload. Torsional rigidity is 1.1 N.m/arcmin — this tells you how much the output shaft twists under load. For positioning applications, the 28 arc.min maximum torsional backlash means the output can lag input by that angle before the teeth engage; if your application needs tighter positioning, a lower-backlash gearbox is needed. Rated service life is 30,000 hours at 100 rpm and 30 °C. The gearbox is lubricated for life — no maintenance re-greasing interval to schedule.
Mechanical limits and environment
Maximum axial force (Fa) on the output shaft is 200 N for a 10,000-hour life, dropping to 160 N for the full 30,000-hour service life at 100 rpm and 30 °C. Radial force (Fr) follows the same pattern: 200 N for 10,000 hours, 160 N for 30,000 hours, measured at mid-distance on the output shaft. Shaft output seal is rated IP54 — splash-resistant but not submersible. Ambient operating range is -25 °C to 90 °C. Housing is black anodized aluminium; shaft material is C45 steel. Noise level is 55 dB at 1 m, no-load — quiet enough for most production-floor environments without an enclosure. Efficiency is 94 %, meaning 6 % of input power is lost as heat through the gear mesh.