The GBX0600031404F is a straight-tooth planetary gearbox with a 60 mm outer diameter, designed for servo or stepper motor output stages where a 3:1 reduction is needed. The continuous output torque is 28 N.m at 100 rpm; the maximum intermittent torque reaches 45 N.m under the same speed and temperature conditions. Efficiency is listed at 94 %, which is typical for a single-stage planetary set at this ratio. The torsional backlash of 16 arc.min is a standard-grade figure — not a precision or low-backlash variant — so the gearbox is suited to positioning axes where repeatability of a few arc-minutes is acceptable, not sub-arcminute contouring. Service life is rated 30,000 hours at 100 rpm and 30 °C ambient. The gearbox is lubricated for life, meaning no field re-greasing interval; the IP54 shaft output seal keeps dust and splash out, but the housing itself is not sealed against washdown — the IP rating applies only at the shaft exit.
Obsolete — sourcing through independent distribution
Schneider Electric has marked this part number obsolete. The GBX0600031404F is sourced through independent surplus and broker channels.