4:1 planetary — 38 N.m continuous, 61 N.m peak
This GBX0600041403F is a 60 mm planetary gearbox with a 4:1 reduction ratio, delivering 38 N.m continuous output torque at 100 rpm and 30 °C ambient, with a peak capability of 61 N.m at the same speed and temperature.
Torque, backlash, and service life — the real selection numbers
Continuous torque is 38 N.m; that is the figure for sizing the gearbox to a sustained load. The 61 N.m maximum output torque covers acceleration peaks and momentary overloads, but the 30000-hour service life at 100 rpm and 30 °C assumes you stay at or below the continuous rating. Maximum torsional backlash is 16 arc.min — this is the angular play between input and output under reversing loads. For a positioning axis that indexes and holds, 16 arc.min is acceptable for general-purpose transfer; a precision indexing table would need a lower-backlash variant. The gearbox is lubricated for life, so no maintenance schedule for oil changes — just confirm the ambient stays within -25 to 90 °C and the shaft output seal (IP54) is clean of washdown spray.
Obsolete — sourcing through independent channels
Schneider Electric lists this GBX0600041403F as obsolete. Available through independent surplus and broker channels. No pin-compatible direct replacement is documented — a functional cross-check against the current GBX catalog is needed if a fresh-production part is required.