Planetary gearbox, 60 mm frame, 9:1
The GBX0600091401F is a 60 mm diameter planetary gearbox with straight teeth and a 9:1 reduction ratio. It delivers 44 N·m continuous output torque at 100 rpm, with a maximum of 70 N·m for peak loads. The 20 arcmin maximum torsional backlash suits positioning applications where repeatable direction reversal is needed without slop. Rated for 30,000 hours service life at 100 rpm and 30 °C ambient, with the IP54 shaft output providing splash protection in dusty or damp panel environments.
Load ratings and mechanical limits
At 100 rpm and 30 °C, the gearbox handles 450 N axial force (Fa) over the full 30,000-hour life, or 600 N if you accept a 10,000-hour service window. Radial force (Fr) at the same speed is 340 N for the longer life, 500 N for the shorter. These are not continuous loads — they define the bearing limits for overhung or thrust loads on the output shaft. The housing is black anodized aluminium; the shaft is C45 steel. Lubricated for life, so no maintenance schedule for oil changes.
Obsolete — sourcing through independent channels
Schneider Electric lists this gearbox as obsolete. No official successor or pin-compatible replacement is offered by the manufacturer. Each unit is verified for fit and condition before quoting. Quantities are lot-specific — confirm the BOM line count and lead time at the RFQ stage.