What this planetary gearbox delivers
The GBX0600201402F is a 60 mm-diameter planetary gearbox with straight teeth, reduction ratio 20:1, and a continuous output torque of 44 N.m at 100 rpm. Maximum output torque hits 70 N.m at the same speed. Efficiency is listed at 94 %, and the noise level at 58 dB at 1 m under no-load — quiet enough for most production-floor environments. Service life is rated 30,000 hours at 100 rpm and 30 °C ambient. Backlash is 20 arc.min maximum — typical for a straight-tooth planetary in this class. The housing is black anodized aluminium, shaft material C 45 steel. Lubricated for life, so no maintenance schedule for grease changes.
Sourcing and lifecycle — obsolete, still available
Schneider Electric lists the GBX0600201402F as obsolete. We source this part through independent distribution channels — surplus, new-old-stock, and broker inventory. Quantities are confirmed at RFQ; no blanket stock claim. If you're holding a BOM that calls this gearbox, the 20:1 ratio and 44 N.m continuous torque are the specs to match for a replacement. No pin-compatible drop-in from Schneider's current catalog is documented.
Ratings that matter for fit
The continuous output torque of 44 N.m at 100 rpm is the number to design around for steady-state loads. Maximum torque of 70 N.m handles occasional peaks — don't run it there continuously. Axial force limit is 450 N at 30,000-hour life, 600 N at 10,000 hours. Radial force at mid-shaft is 340 N for the longer life, 500 N for the shorter. Both at 100 rpm. IP54 at the shaft output means it's splash-resistant but not washdown-rated.