Skip to main content
Schneider Electric GBX0800040553F — Gear Reducers & Gearboxes

Schneider Electric GBX0800040553F Planetary Gearbox, 4:1

MPNGBX0800040553F
Obsolete

Schneider Electric GBX0800040553F planetary gearbox, straight teeth, 80 mm diameter, 4:1 reduction, 115 N.m continuous torque, 94 % efficiency, 9 arc.min backlash, shaft output IP54.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GBX0800040553F — Identification
ParameterValue
Product / component typePlanetary gearbox
Gearbox typeStraight teeth
Compatibility codeGBX
Device short nameGBX
GBX0800040553F — Performance
ParameterValue
Reduction ratio4:1
Output torque, max.1628.5 lbf.in (184 N.m) 100 rpm 86 °F (30 °C)
Output torque, continuous1017.8 lbf.in (115 N.m) 100 rpm 86 °F (30 °C)
Torsional backlash, max.9 arc.min
Efficiency94 %
Torsional rigidity6 N.m/arcmin
Service life30000 h 100 rpm 86 °F (30 °C)
Noise level60 dB 1 m, no-load
GBX0800040553F — Mechanical
ParameterValue
Axial force (Fa), max.1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C
Radial force (Fr), max.650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C
Gearbox outer diameter3.1 in (80 mm)
Housing materialBlack anodized aluminium
Shaft materialC 45
GBX0800040553F — Environmental
ParameterValue
IP protection ratingShaft output IP54
Ambient operating temperature-13...194 °F (-25...90 °C)

Product details

What 115 N.m continuous and 184 N.m peak mean for your axis

The GBX0800040553F is a 80 mm-diameter planetary gearbox with a 4:1 reduction ratio. Continuous output torque is 115 N.m at 100 rpm and 30 °C ambient; maximum output torque hits 184 N.m under the same conditions — that 1.6x peak gives you headroom for acceleration and occasional overload without oversizing the frame. Rated service life is 30000 hours at 100 rpm and 30 °C, with the gearbox lubricated for life — no maintenance oil changes, which matters for sealed-into-the-machine applications.

Efficiency, backlash, and noise — the fit details

Listed efficiency is 94 % — that's about 6 % of input power lost as heat, which the black anodized aluminium housing (80 mm OD) has to sink. For a continuously running axis, that heat load needs to be considered in the enclosure thermal budget. Maximum torsional backlash is 9 arc.min — that's the lost motion between input and output under reversing load. For positioning applications, this sets the repeatability floor; for simple speed-reduction drives it's less critical. Noise level is 60 dB at 1 m, no-load — a moderate figure that won't dominate a typical machine floor but should be noted if the gearbox is in an operator-adjacent area.

Sourcing reality — obsolete, available through independent channels

The part is available through independent surplus and broker channels. Quantities are confirmed per RFQ; expect lot-specific pricing and no manufacturer warranty — standard for this sourcing route.

Shaft loads and sealing — mounting constraints

Maximum axial force (Fa) is 1200 N at 100 rpm for 10000 hours, derating to 900 N for the full 30000-hour life. Maximum radial force (Fr) is 950 N at mid-shaft for 10000 hours, 650 N for 30000 hours. These are the limits for bearing life — overhung loads from belt drives or pinions need to be checked against these curves. Shaft output seal is IP54 — splash-proof, not washdown-rated. The housing is black anodized aluminium, shaft material C45 (medium carbon steel). Ambient operating range is -13 to 194 °F (-25 to 90 °C).

Frequently asked questions

What is the continuous torque rating of the GBX0800040553F?

Continuous output torque is 115 N.m (1017.8 lbf.in) at 100 rpm and 30 °C ambient. Maximum output torque is 184 N.m (1628.5 lbf.in) under the same conditions.

MPN
GBX0800040553F