The GBX0800151401F is a straight-tooth planetary gearbox from Schneider Electric's GBX series, with an 80 mm housing diameter and a 15:1 reduction ratio. Continuous output torque is 110 N.m at 100 rpm and 30 °C; maximum output torque reaches 176 N.m under the same conditions — the continuous figure governs steady-state duty, while the maximum covers occasional overloads like acceleration peaks. Rated efficiency of 94 % means about 6 % of input power is lost as heat in the gear train — relevant for thermal budgeting in the enclosure, especially at sustained high load. Noise output is 60 dB at 1 m, no-load — typical for a precision planetary stage of this size; the straight-tooth profile is inherently louder than helical, but the 60 dB figure is within range for a motor-gearbox assembly in a machine frame. Service life is rated at 30,000 hours at 100 rpm and 30 °C, with the gearbox lubricated for life — no maintenance interval for oil changes.
Obsolete — sourcing through independent channels
The GBX0800151401F is available through independent surplus and broker channels; quantities are confirmed at RFQ against the BOM line.
Shaft loading and mounting constraints
Maximum radial force on the output shaft is 650 N at 100 rpm for the 30,000-hour service life, applied at mid-span; axial force is limited to 900 N under the same duty cycle. Shaft output seal is rated IP54 — suitable for dry indoor environments but not washdown or outdoor exposure. Housing is black anodized aluminium; shaft material is C45 steel — standard for this class of planetary reducer. Maximum torsional backlash is 14 arc-min — a standard-precision grade; for applications requiring tighter positioning repeatability, a lower-backlash variant from the same family would be needed.