Skip to main content
Log in
Schneider Electric GBX0800151402F — Gear Reducers & Gearboxes

Schneider GBX0800151402F planetary gearbox, 15:1, 110 N.m

MPNGBX0800151402F
Obsolete

Schneider Electric GBX0800151402F planetary gearbox, straight teeth, 80 mm diameter, 15:1 reduction, 110 N.m continuous torque, 94% efficiency, IP54 shaft output.

Schneider Electric GBX0800151402F datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GBX0800151402F — Identification
ParameterValue
Product / component typePlanetary gearbox
Gearbox typeStraight teeth
Compatibility codeGBX
Device short nameGBX
GBX0800151402F — Performance
ParameterValue
Reduction ratio15:1
Output torque, max.1557.7 lbf.in (176 N.m) 100 rpm 86 °F (30 °C)
Output torque, continuous973.6 lbf.in (110 N.m) 100 rpm 86 °F (30 °C)
Torsional backlash, max.14 arc.min
Efficiency94 %
Torsional rigidity6.5 N.m/arcmin
Service life30000 h 100 rpm 86 °F (30 °C)
Noise level60 dB 1 m, no-load
GBX0800151402F — Mechanical
ParameterValue
Axial force (Fa), max.1200 N 100 rpm, during 10000 hour at 30°C 900 N 100 rpm, during 30000 hour at 30°C
Radial force (Fr), max.650 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 950 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C
Gearbox outer diameter3.1 in (80 mm)
Housing materialBlack anodized aluminium
Shaft materialC 45
GBX0800151402F — Environmental
ParameterValue
IP protection ratingShaft output IP54
Ambient operating temperature-13...194 °F (-25...90 °C)

Product details

80 mm planetary, 15:1, 110 N.m continuous

The GBX0800151402F is a straight-tooth planetary gearbox from Schneider Electric's GBX series, 80 mm diameter, with a 15:1 reduction ratio. It delivers 110 N.m continuous output torque at 100 rpm (30 °C) and peaks at 176 N.m maximum torque under the same conditions. Rated service life is 30,000 hours at 100 rpm and 30 °C — the lubrication is sealed for life, so no oil changes over that interval.

Load ratings and shaft limits

Maximum axial force on the output shaft is 1200 N for a 10,000-hour life at 100 rpm and 30 °C, derated to 900 N for the full 30,000-hour service life. Radial force limits are 950 N (10,000 h) and 650 N (30,000 h), measured at mid-span on the output shaft. Torsional rigidity is 6.5 N.m/arcmin, with a maximum torsional backlash of 14 arc.min — this is a standard-precision planetary, not a zero-backlash stage.

Efficiency, noise, and environmental sealing

Rated efficiency is 94 %, typical for a single-stage straight-tooth planetary at this ratio. Noise level is 60 dB at 1 m, no-load — quiet enough for most production-floor installations without an enclosure. The housing is black anodized aluminium; the output shaft is C45 steel. Shaft output seal is rated IP54, so it handles dust and splash but not washdown or submersion. Ambient operating range is -25 to 90 °C.

Sourcing — obsolete, quoted to order

Schneider Electric lists the GBX0800151402F as obsolete.

MPN
GBX0800151402F