Obsolete status and sourcing path
The GBX0800201403F: The replacement path requires reviewing the application's torque, ratio, and mounting envelope against current GBX-series offerings.
Torque ratings and duty cycle
Rated for 120 N.m continuous output torque at 100 rpm and 30 °C, with a maximum output torque of 192 N.m under the same conditions — the extra headroom handles peak loads during acceleration or momentary overloads without immediate damage. Service life is specified at 30,000 hours at 100 rpm and 30 °C, lubricated for life — no maintenance oil changes required over the service interval. The 94 % efficiency figure means 6 % of input power is lost as heat through the straight-teeth mesh.
Shaft loading and environmental limits
Maximum radial force on the output shaft is 650 N at mid-span for the full 30,000-hour service life; axial force is limited to 900 N over the same interval. Exceeding these loads shortens bearing life proportionally. The shaft output carries an IP54 rating — protected against dust ingress and splashing water, but not submersion. Ambient operating range is -25 °C to 90 °C; the black anodized aluminium housing dissipates heat but should not be enclosed without ventilation in high-duty-cycle applications.