Obsolete — sourcing through independent channels
Schneider Electric lists the GBX0800600701F as obsolete. This unit is sourced through independent distribution — quantities and pricing confirmed at RFQ against your BOM line.
60:1 planetary reduction, 110 N.m continuous
This is a straight-tooth planetary gearbox, 80 mm outer diameter, with a 60:1 reduction ratio. Continuous output torque is 110 N.m at 100 rpm and 30 °C; maximum intermittent torque reaches 176 N.m under the same conditions. The 94 % efficiency figure means about 6 % of input power is lost as heat through the gear mesh — typical for a single-stage planetary at this ratio.
Service life, backlash, and load limits
Rated service life is 30,000 hours at 100 rpm and 30 °C. Maximum torsional backlash is 16 arc-minutes — a moderate figure for a straight-tooth planetary, meaning the output shaft can rotate up to 16 arc-minutes before the input engages. Maximum axial force on the output shaft is 1200 N for a 10,000-hour life at 30 °C, derating to 900 N for the full 30,000-hour rating. Maximum radial force applied mid-span on the output shaft is 950 N for 10,000 hours, dropping to 650 N for 30,000 hours. Torsional rigidity is 6.3 N.m/arcmin — the shaft twists 1 arc-minute per 6.3 N.m of applied torque.
Environmental and mechanical construction
The housing is black anodized aluminium; the shaft is C45 carbon steel. The shaft output carries an IP54 rating — protected against dust ingress and splashing water, but not submersion or pressurized washdown. Noise level is 60 dB at 1 m, no-load — audible but not loud for a gearbox of this size. The unit is lubricated for life, requiring no maintenance over its service interval.