Obsolete — sourcing through independent channels
The GBX0800601402F: Available through independent surplus and broker channels; quantities are lot-specific and confirmed at RFQ.
Torque ratings that drive the sizing decision
Continuous output torque is 110 N.m (973.6 lbf.in) at 100 rpm, 30 °C — this is the sustained load the gearbox can carry without exceeding its thermal and mechanical limits. Maximum output torque reaches 176 N.m (1557.7 lbf.in) at the same speed and temperature, covering peak loads during acceleration or momentary overloads. Service life is rated at 30,000 hours at 100 rpm and 30 °C — a common benchmark for continuous-duty indexing or conveyor drives.
Mechanical load limits and backlash
Maximum axial force Fa is 1200 N at 100 rpm for a 10,000-hour life, dropping to 900 N for the 30,000-hour rating — the trade-off between peak load and service life is explicit. Maximum radial force Fr is 950 N at 100 rpm for 10,000 hours, applied at mid-distance from the output shaft; for the 30,000-hour target it reduces to 650 N. Maximum torsional backlash is 16 arcmin — a standard precision class for positioning applications where repeatability is not sub-arcminute.
Environmental and integration specs
Shaft output is IP54 — protected against dust ingress and splashing water, suitable for washdown-adjacent environments but not for direct high-pressure spray. The gearbox is lubricated for life — no scheduled oil changes; the black anodized aluminium housing resists corrosion in humid or mildly aggressive atmospheres.
Efficiency and noise profile
Rated efficiency is 94 % — a typical figure for a single-stage planetary with straight teeth at full load; the remaining 6 % is dissipated as heat, so thermal management in the enclosure should account for that. Noise level is 60 dB at 1 m, no-load — equivalent to a quiet office; under load the straight-tooth mesh will produce more audible gear whine, but the rating gives a baseline for acoustic planning.