80 mm planetary gearbox — 80:1 reduction, 120 N.m continuous
Schneider Electric GBX0800801401F is a straight-teeth planetary gearbox, 80 mm outer diameter, with an 80:1 reduction ratio. It delivers 120 N.m continuous output torque at 100 rpm and 30 °C ambient, with a maximum of 192 N.m under the same conditions. Rated service life is 30,000 hours at 100 rpm and 30 °C — the axial and radial load limits drop after 10,000 hours (Fa 1200 N → 900 N; Fr 950 N → 650 N), so sizing for the longer service interval means staying under the lower limits. This gearbox carries IP54 at the shaft output — sealed against dust ingress and splash, but not submersion. The black anodized aluminium housing sheds corrosion in dry indoor environments; C 45 steel output shaft handles standard keyed couplings.
Lifecycle status — obsolete, sourced to order
Schneider Electric has marked the GBX0800801401F as obsolete. Available through independent surplus and broker channels. Quantities are lot-specific — confirmed at RFQ. No stock-holding claim; this is a quoted-to-order line. Expedite options depend on available inventory at the time of request.
Integration constraints — mounting and loads
Output shaft IP54 means the gearbox is splash-resistant but not washdown-rated — keep it clear of directed spray. Ambient operating range is -25 to 90 °C, so it can sit in a warm enclosure but not next to a furnace. Torsional rigidity is 6.3 N.m/arcmin; maximum backlash is 16 arc.min — not a precision-indexing gearhead, but fine for conveyor drives, rotary tables, or general speed reduction where repeatability is not sub-arcminute. Lubricated for life — no maintenance oil changes. The 94 % efficiency means about 6 % power loss as heat; at 120 N.m output the thermal rise stays within the aluminium housing's dissipation capacity at 30 °C ambient.