Skip to main content
Log in
Schneider Electric GBX1201001402F — Gear Reducers & Gearboxes

Schneider Electric GBX1201001402F Planetary Gearbox, 100:1

MPNGBX1201001402F
Obsolete

Schneider Electric GBX1201001402F planetary gearbox, straight teeth, 100:1 reduction, 120 mm diameter, 260 N.m continuous torque, 94% efficiency, IP54 shaft output.

Schneider Electric GBX1201001402F datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GBX1201001402F — Identification
ParameterValue
Product / component typePlanetary gearbox
Gearbox typeStraight teeth
Compatibility codeGBX
Device short nameGBX
GBX1201001402F — Performance
ParameterValue
Reduction ratio100:1
Output torque, max.3681.9 lbf.in (416 N.m) 100 rpm 86 °F (30 °C)
Output torque, continuous2301.2 lbf.in (260 N.m) 100 rpm 86 °F (30 °C)
Torsional backlash, max.14 arc.min
Efficiency94 %
Torsional rigidity12 N.m/arcmin
Service life30000 h 100 rpm 86 °F (30 °C)
Noise level65 dB 1 m, no-load
GBX1201001402F — Mechanical
ParameterValue
Axial force (Fa), max.2100 N 100 rpm, during 30000 hour at 30°C 2800 N 100 rpm, during 10000 hour at 30°C
Radial force (Fr), max.1500 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C 2000 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C
Gearbox outer diameter4.7 in (120 mm)
Housing materialBlack anodized aluminium
Shaft materialC 45
GBX1201001402F — Environmental
ParameterValue
IP protection ratingShaft output IP54
Ambient operating temperature-13...194 °F (-25...90 °C)

Product details

Planetary gearbox — 100:1 reduction, 260 N.m continuous

The GBX1201001402F is a planetary gearbox from Schneider Electric with a 100:1 reduction ratio, delivering a continuous output torque of 260 N.m at 100 rpm and 30 °C, and a maximum output torque of 416 N.m under the same conditions. Rated efficiency is 94 % — losses are low enough that forced cooling is not required in most duty cycles, but the 30000-hour service life at rated load assumes the gearbox is operated within the torque and speed envelope specified.

Mechanical ratings that govern the application

Torsional rigidity is 12 N.m/arcmin, with a maximum torsional backlash of 14 arc.min — this gearbox is not intended for zero-backlash positioning; it suits indexing and conveying where the lost motion is acceptable. Maximum axial force Fa is 2100 N at 100 rpm for the 30000-hour life target, and 2800 N for a 10000-hour duty cycle. Radial force Fr at the mid-point of the output shaft is 1500 N and 2000 N respectively. The housing is black anodized aluminium with an external diameter of 120 mm; the shaft is C 45 steel. IP54 protection at the shaft output means it resists dust ingress and splashing water — suitable for washdown areas if the mating motor and seals are similarly rated.

Lifecycle status — obsolete, sourced through surplus channels

Schneider Electric has marked the GBX1201001402F as obsolete. This part is sourced through independent surplus and broker channels. Quantities are confirmed at RFQ; no stock-holding claim is made. The gearbox is lubricated for life and does not require field maintenance beyond the rated service interval.

Frequently asked questions

What is the continuous torque rating of GBX1201001402F?

Continuous output torque is 260 N.m at 100 rpm and 30 °C. Maximum output torque is 416 N.m under the same conditions.

What compliance documentation does Schneider Electric provide for GBX1201001402F?

For obsolete parts sourced through surplus channels, documentation is typically limited to what the original manufacturer published before discontinuation.

MPN
GBX1201001402F