Torque capacity and duty cycle
The GBX1600401084D delivers 700 N.m continuous output torque, with a maximum intermittent rating of 1120 N.m — the 60% headroom handles acceleration peaks and occasional overloads without oversizing the frame. Service life is rated 30,000 hours at 100 rpm input and 30 °C ambient; the axial and radial force limits at that duty point are 6000 N and 4200 N respectively, applied at mid-span on the output shaft. Torsional rigidity is 41 N.m/arcmin, and maximum backlash is held to 10 arcmin — tight enough for positioning axes where cumulative error across multiple stages must stay under control.
Mechanical integration and environmental limits
The 160 mm diameter housing is black anodized aluminium; shaft material is C45 steel. Mounting position is unrestricted — any orientation works, which simplifies layout in tight machine frames. Shaft output seal is rated IP54, adequate for dry indoor environments with occasional dust or splash. The gearbox is lubricated for life — no maintenance refill schedule, no breather or drain port to plumb. Noise output is 70 dB at 1 m under no-load conditions.
Production status and ordering
No stock-holding claim — quoted per BOM quantity.