The Schneider Electric HMIFP6600TMD is a 12.1-inch industrial touch panel from the Harmony FP6 series, built for panel-mount or VESA-mount installation in control cabinets and operator stations. The XGA LED display runs at 1024 x 768 pixels with 16 million colours, driven by an analog multi-touch resistive overlay that registers two simultaneous touch points — enough for pinch-zoom or two-hand gestures on a machine interface. The 24 V DC supply draws 17.6 W under load, with a 30 A inrush at power-up that the panel supply must handle. Natural convection cooling means no fan to fail, and the IP66f/IP67f front face — plus NEMA Type 1, 4X, 12, 13 ratings — lets it live on a washdown line or in a dusty enclosure without a secondary cover.
Panel cut-out and integration
The panel cut-out is 301.5 (+1/-0) x 227.5 (+1/-0) mm — a tight tolerance slot that requires a clean rectangular punch or laser cut. Overall dimensions are 315 mm wide by 241 mm tall by 67.5 mm deep, so the enclosure depth needs clearance behind the gland plate for the DVI-D, dual USB Type B, and USB Type A connectors. Mounting options include direct panel mounting with the supplied clamps or VESA-pattern brackets. The 4:3 aspect ratio and 12.1-inch diagonal match standard industrial display footprints, simplifying replacement of older 12-inch units.
Rated for operation from 0 to 55 °C and storage from -20 to 60 °C, with a maximum operating altitude of 2000 m. Shock resistance is 147 m/s² per IEC 61131-2, and vibration tolerance is 1 gn across 5–150 Hz — figures that suit it for machine-mounted applications on conveyors, presses, or packaging lines. The backlight is rated for 50,000 hours at 25 °C — roughly 5.7 years of continuous run — after which brightness may degrade below usable levels. Pollution degree 2 (non-conductive dust, occasional condensation) is the intended environment; a higher pollution class would require a sealed enclosure. Compliance documentation covers CE, FCC Part 15, UL 61010-2-201, and CSA C22.2 No 61010-2-201. EMC immunity includes electrostatic discharge at 6 kV contact / 8 kV air (IEC 61000-4-2 Level 3) and fast transients at 2 kV on power ports, 1 kV on signal ports — typical for industrial panels in heavy machine shops.