Panel PC for HMI and edge applications
The Schneider Electric HMIP6A7B0NA0DNAN00 is a 15-inch modular box PC from the Harmony P6 range, combining a touch panel screen with a PC runtime in a fanless enclosure. The 1280 x 800 LED display with 16 million colours gives clear visibility for machine-level HMI, SCADA nodes, or edge analytics — the 4:3 aspect ratio suits traditional panel cut-outs and keeps the interface readable at distance. It runs on a 12-24 VDC supply (9-36 V limits) with a 30 A inrush, so factor the power budget at the panel design stage — a standard 24 VDC industrial supply handles it, but the inrush matters if you share a bus with sensitive controllers. The IP66f/IP67f front and NEMA 4X/13 rating means it withstands washdown and dust ingress on the panel face — suited for food, beverage, or chemical processing lines where the operator station gets hosed down. The fanless cooling eliminates filter changes and failure points in dirty environments.
Software stack and runtime options
This unit ships with Node-RED preinstalled, plus run-time options for EcoStruxure Machine SCADA Expert, EcoStruxure Operator Terminal Expert, and AVEVA System Platform. Additional software packages (EcoStruxure Secure Connect, Stratus EverRun, Trellix) are available with separately purchased licenses. That means one hardware SKU covers multiple deployment roles — HMI, SCADA node, edge gateway — depending on the software load you commission.
Mounts via panel cut-out (383.5 x 282.5 mm with +1/-0 tolerance) or VESA pattern. The cut-out dimensions are tight — the +1/-0 mm tolerance means the panel opening must be cut to size, not oversize. Panel thickness and gasket compression affect seal integrity; the IP66f/IP67f rating depends on correct installation. Depth is only 67 mm (2.6 in), which keeps the enclosure shallow — useful when the back-panel clearance is tight. One expansion slot is available for optional interface cards (fieldbus, additional Ethernet, serial).
Rated for 0-55 °C operating ambient on the panel side, with derated ranges for book or flat mounting orientations. The 50,000-hour backlight lifespan at 25 °C means roughly 5.7 years of continuous 24/7 operation before brightness degrades noticeably. Compliance covers EN/IEC 61000-4-2 (ESD), IEC 61000-4-4 (burst), FCC Part 15, and UL 61010-2-201 — the UL mark covers North American panel installations. Pollution degree 2 rating means it's intended for a clean, dry indoor environment (typical control cabinet), not outdoor or condensing atmospheres. Shock resistance at 147 m/s² and vibration resistance at 9.8 m/s² (9-150 Hz) per IEC 61131-2 with an M.2 SSD — the solid-state storage is essential for the vibration spec; a spinning hard drive would not hold the rating.