Panel PC for machine-level visualization and edge processing
The Schneider Electric Harmony P6 HMIP6AAB0NA0DNAN00 is a 21.5-inch modular box PC with a fanless LED touchscreen, built for panel-mount or VESA-mount deployment on production lines and machine cells. It runs on a 12...24 VDC supply (9...36 V limits) and draws a 30 A inrush on power-up — ensure the panel-side DC supply can handle that peak without dropping below the minimum hold voltage.
Display and interaction
The 21.5-inch LED panel delivers 1920 x 1080 pixel resolution at a 16:9 aspect ratio with 16 million colours, supporting a native display resolution up to 4096 x 2304 pixels at 60 Hz for detailed SCADA or machine graphics. Backlight is rated for 50,000 hours at 25 °C — roughly 5.7 years of continuous run time before luminance drops to half, which is a typical MTBF planning figure for a line-side HMI.
Environmental sealing and mounting
Rated IP66f and IP67f on the front face with NEMA 4X/13 — the unit withstands hose-down cleaning and temporary submersion, making it suitable for food-and-bev or washdown zones. Panel-mount cut-out is 518.5 (+1/-0) x 316.5 (+1/-0) mm; the overall dimensions are 21.0 in wide, 13.02 in tall, and 2.7 in deep. VESA mounting is also supported for swing-arm or pedestal placement. Pollution degree 2 per IEC 61131-2 means it's rated for normal factory-floor atmospheres with only non-conductive contamination; not for conductive dust or chemical spray environments without additional enclosure protection.
Software and connectivity
The unit ships with Node-RED preinstalled and includes run-time licenses for EcoStruxure Machine SCADA Expert, EcoStruxure Operator Terminal Expert, and the AVEVA system platform installer — covering both edge-logic and full SCADA visualization out of the box. One expansion slot is available for optional interface cards (fieldbus, additional Ethernet, serial). EcoStruxure Secure Connect and Stratus EverRun are available as separately licensed add-ons.
Compliance covers EN/IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT/burst), FCC Part 15, and UL 61010-2-201 for industrial control equipment. Electrostatic discharge immunity is tested to 6 kV contact discharge at Level 3.