The Schneider Electric HMIP6ABCTO is a Harmony P6 modular box PC built around an Intel Atom x6211E dual-core processor with 4 GB of RAM. It ships as a configured product — the hardware and runtime licenses are matched to the order, so the unit arrives ready to load the application, not as a bare chassis. The software stack is the real differentiator here: Node-RED is preinstalled, plus the EcoStruxure Machine SCADA Expert runtime and EcoStruxure Operator Terminal Expert runtime (both on the configured offer). AVEVA System Platform installer is included, and Trellix security software is available under a separate license. That means this box can serve as a SCADA node, an edge gateway, or an HMI runtime target without additional software procurement — the runtime is baked in.
The enclosure is rated NEMA 4X/13, so it resists corrosion, dust, and hose-directed water — suitable for food-and-bev washdown zones or outdoor cabinets where a standard panel PC would need a separate enclosure. Pollution degree 2 confirms it for controlled environments (typical for industrial panels with some condensation). Cooling is fanless, which eliminates the most common failure point in panel PCs — the cooling fan. The operating range is 32 to 131 °F (0 to 55 °C) for wall, book, flat, and panel mounting orientations, so orientation doesn't restrict airflow. Shock resistance is 147 m/s² in X, Y, Z per IEC 61131-2, meaning it survives the vibration on a machine frame or a moving gantry without a separate isolation mount. One slot is available for an optional interface card — fieldbus, additional Ethernet, or serial expansion. If the application needs PROFINET, EtherNet/IP, or a second network segment, that slot is where the card goes. The 30 A inrush current matters for the power supply sizing: a 24 VDC supply feeding this box needs to handle that momentary surge without dropping out, so factor it into the panel's DC load calculation.