The HMIP6DBB0NA0WNAN00 is a Harmony P6 modular box PC from Schneider Electric, built around a 4-core Intel Atom x6425E processor. It's the compute engine for a panel-mounted HMI or edge gateway — fanless, panel-mount, and rated for the 9-36 VDC supply range typical of industrial control cabinets. Display output goes up to 4096 x 2304 pixels at 60 Hz, so it drives a large-format industrial monitor cleanly. The software stack ships with Node-RED preinstalled, plus run-time licenses for EcoStruxure Machine SCADA Expert and Operator Terminal Expert on configured offers — you're not hunting for a runtime disk after the panel is built. Enclosure rating is IP66f/IP67f and NEMA 4X/13, meaning the box itself withstands hose-down and dust ingress when mounted in a washdown zone — no separate enclosure needed for food-and-bev or chemical processing lines.
Panel-mount only — no DIN-rail clip. The box measures 9.8 in wide by 6.5 in tall by 1.5 in deep (250 x 165 x 37 mm), so it fits a shallow enclosure backplate. One slot for an optional interface card (fieldbus or additional I/O). Power draw: inrush current peaks at 30 A on a 12-24 VDC supply; steady-state draw isn't listed, but the supply range is 9-36 VDC, so a standard 24 VDC industrial supply with adequate inrush headroom covers it. Ambient operating range is 32-131 °F (0-55 °C) for wall or book mounting, derated to 122 °F (50 °C) when a 19-22 in display is attached. Compliance covers EN/IEC 61000-4-2 (ESD), IEC 61000-4-4 (burst), FCC Part 15, and UL 61010-2-201 — the usual suite for industrial control equipment sold into North American and European panels.