The Schneider Electric Harmony P6 HMIP6DGB0NA0WNAN00 is a modular box PC with a 18.5-inch LED touch panel, running on a 12-24 VDC supply. It delivers 1920 x 1080 pixel resolution at 60 Hz and displays 16 million colours, making it suited for machine-level HMI and SCADA visualization in industrial environments. The front panel carries IP66f and IP67f protection per IEC 61131-2, plus NEMA 4X/13, so it withstands washdown and dusty conditions — typical for food-and-bev, chemical, or outdoor cabinet installations. The rear enclosure is IP20, intended for inside the panel. It ships with Node-RED preinstalled and supports EcoStruxure Machine SCADA Expert, EcoStruxure Operator Terminal Expert, and AVEVA system platform runtimes (on configured offers). Additional software licenses (EcoStruxure Secure Connect, Stratus EverRun, Trellix) are purchased separately.
Mounts via panel cut-out or VESA pattern. The cut-out dimensions are 449.5 (+1/-0) x 279.5 (+1/-0) mm. Overall width is 18.3 in (463.6 mm), height 11.6 in (293.6 mm), depth 2.7 in (69 mm) — shallow enough for shallow enclosures. One slot is available for an optional interface card (fieldbus, serial, or additional Ethernet). The unit is fanless, so no airflow clearance is needed above or below, but ambient temperature must stay within 32-122 °F (0-50 °C) for panel-side mounting.
Compliant with EN/IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT), FCC Part 15, and UL 61010-2-201. Pollution degree 2. The ESD immunity is tested at 6 kV contact discharge, level 3.
Environmental ratings
Operating temperature range is 32-122 °F (0-50 °C) for panel-side mounting; book and flat mounting allow up to 131 °F (55 °C). Storage range is -4 to 140 °F (-20 to 60 °C). Relative humidity 10-90% non-condensing. Shock resistance tested at 147 m/s² in X, Y, Z directions (3 times each). Vibration resistance 9.8 m/s² from 9-150 Hz with M.2 SSD, per IEC 61131-2. Backlight rated for 50,000 hours at 77 °F (25 °C).