The Schneider Electric HMIPSPS752D1X01 is a 15.6-inch Performance Panel PC from the Easy Harmony iPC range, built around a Core i5 processor with 8 GB of RAM and a 128 GB mSATA SSD. It runs on Windows 10 and is designed for EcoStruxure Machine SCADA Expert runtime — the HMI/SCADA license is not included, so budget for that separately. The display is a colour TFT LCD with LED backlight, 1366 x 768 pixel resolution (FWXGA), 16:9 aspect ratio, and 400 cd/m² luminance. Viewing angle is 160° horizontal by 170° vertical. Touch input is single-touch analogue resistive — no multi-touch gestures, which matters if your operators are used to swiping through screens. Rated supply is 12...24 V DC with a -15...20 % tolerance window, drawing 1.9 A. That's a wide enough range to run off a standard 24 V industrial supply without a separate converter, but watch the inrush on a shared PSU.
Panel cut-out and mounting
Mounts into a panel cut-out of 390 x 244 mm, secured by clips and screws. Overall dimensions are 400 mm wide, 254 mm high, and only 50.5 mm deep — shallow enough that it won't crowd the backplane wiring in a typical enclosure. The housing is aluminium alloy, passive fanless cooling, so no filter maintenance. Front panel is rated IP65 — fine for washdown zones and dusty plant floors. Rear panel is IP20, so keep the enclosure sealed if the back is exposed to debris.
Connectivity and compliance
Comes with two Ethernet ports, four USB ports, two COM ports, and a remote switch connection. The onboard watchdog timer is configurable from 1 to 255 ms. EMC compliance covers IEC 61000-4-2, -4-3, -6-4, and -6-5, plus the Low Voltage Directive 2006/95/EC.