The HMIYADSLIDEIN11 is a slide-in adaptor from the Schneider Electric Harmony iPC range, designed to mount a storage drive (HDD or SSD) inside the industrial PC chassis. It is classified as an adaptation accessory under Category 22575-MAGELIS MC3. This part is now listed as Obsolete by the manufacturer.
Schneider Electric's lifecycle record marks HMIYADSLIDEIN11 as Obsolete. No direct successor order code is published for this adaptor. Buyers holding a BOM with this line should expect to source through surplus or broker channels; the part is not in active factory production. Because the adaptor is a mechanical slide-in bracket specific to the Harmony iPC enclosure, a substitute would need to match the chassis slot geometry and the SATA/power connector alignment. No pin-compatible or form-fit alternative is listed by the manufacturer.
The adaptor accepts a standard 2.5-inch HDD or SSD. The user must verify compatibility with the third-party drive being installed — the manufacturer explicitly notes that third-party drives are to be checked by the user. Mounting is internal to the Harmony iPC chassis; no DIN-rail or panel cut-out is involved. The slide-in design means the drive assembly slots into a dedicated bay, connecting to the motherboard via the integrated HDD/SSD interface.