Skip to main content
Log in
Schneider Electric LAEN02 — Auxiliary Contacts

Schneider Easy TeSys LAEN02 Auxiliary Contact Block, 2NC, 69

MPNLAEN02
Active

Schneider Electric Easy TeSys Control, auxiliary contact block LAEN02, 2 NC instantaneous contacts, 690 V rated insulation voltage, IP20, for LC1E/CAE contactors.

$4.65 – $8.98Ref. price · indicative, final on quote
Schneider Electric LAEN02 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LAEN02 — Identification
ParameterValue
Product typeAuxiliary contact block
Product range / familyEasy TeSys Control
Product range / familyEasy TeSys
LAEN02 — Ratings
ParameterValue
Rated operational voltage (Ue)10 MOhm
LAEN02 — Performance
ParameterValue
Rated insulation voltage (Ui)690 V - for control circuit conforming to IEC 60947-5-1
LAEN02 — Mechanical
ParameterValue
Terminal connections / wire rangeControl circuit: screw clamp terminals 1 1 mm² - external diameter: 6 mm - cable stiffness: solid or flexible with cable end Control circuit: screw clamp terminals 1 1 mm² - external diameter: 6 mm - cable stiffness: solid or flexible without cable end Control circuit: screw clamp terminals 2 2.5 mm² - external diameter: 6 mm - cable stiffness: solid or flexible with cable end Control circuit: screw clamp terminals 2 2.5 mm² - external diameter: 6 mm - cable stiffness: solid or flexible without cable end
IP degree of protectionIP20 conforming to IEC 60529
LAEN02 — Environmental
ParameterValue
Operating ambient temperature-5...55 °C
Storage ambient temperature-60...80 °C
Operating altitude3000 m without derating
Protective treatmentTH conforming to IEC 60068
LAEN02 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ

Product details

What this block does

The LAEN02 is a front-mounted auxiliary contact block in the Easy TeSys Control range, carrying two normally-closed instantaneous contacts. It mounts directly onto LC1E and CAE contactors to provide status feedback or interlock signals without a separate terminal block.

The block is certified to EN/IEC 60947-1 and 60947-5-1, plus the Chinese GB/T equivalents 14048.1 and 14048.5. It also meets EN/IEC 60335-1 Clause 30.2 and 60335-2-40 Annex JJ for appliance applications — useful if this ends up in HVAC or commercial refrigeration control panels. Protective treatment is TH conforming to IEC 60068, meaning it's tested for tropical heat and humidity conditions.

No successor is listed because none is needed; it's the standard aux block for the Easy TeSys contactor line.

Frequently asked questions

What contactors does the LAEN02 fit?

It mounts on the front of LC1E and CAE contactors in the Easy TeSys Control range.

What is the contact configuration?

Two normally-closed (2 NC) instantaneous auxiliary contacts.

What wire sizes does the terminal accept?

Screw clamp terminals accept 1 × 1 mm² or 2 × 2.5 mm² solid or flexible wire, with or without cable end ferrules.

What standards does this block comply with?

It complies with EN/IEC 60947-1, EN/IEC 60947-5-1, GB/T 14048.1, GB/T 14048.5, and relevant clauses of EN/IEC 60335-1 and 60335-2-40.

MPN
LAEN02