Skip to main content
Schneider Electric LC1D65008U7

Schneider LC1D65008U7 TeSys Deca 4P Contactor, 80 A AC-1, 12

MPN LC1D65008U7
Active

Schneider Electric TeSys Deca contactor, 4-pole, 80 A AC-1, AC coil 50/60 Hz, screw terminals, depth 4.9 in (125 mm), mature lifecycle.

$765.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LC1D65008U7 key specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor
VoltagePower circuit Power circuit <= 300 V DC
Coil voltage240 V AC 50/60 Hz
Current80 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit
Breaking capacity1000 A at 440 V for power circuit conforming to IEC 60947
Utilization categoryAC-1
IP ratingIP20
Temp operating max60 °C
Temp operating min-40 °C
Pollution degree3
Depth4.9 in (125 mm)

All specifications

LC1D65008U7 additional specifications
ParameterValue
Width3.3 in (85 mm)
Height5 in (127 mm)
Electrical life cycles1.4 Mcycles 80 A AC-1 <= 440 V
Mechanical life cycles6 Mcycles
ApplicationResistive load
Fire behaviorV1 conforming to UL 94
Operating time4...19 ms opening 12...26 ms closing
Permissible ambient air temperature around the device-40...140 °F (-40...60 °C) 140...158 °F (60...70 °C) with derating

Product details

It switches 80 A at up to 440 V and carries a rated breaking capacity of 1000 A at 440 V. This is not a motor-starting contactor – the AC-1 rating is for resistive heating, lighting, or other non-inductive loads.

The 4-pole design (2 NO + 2 NC) gives you two normally-open and two normally-closed power poles, which is useful for switching both line and neutral or for double-break configurations. The coil is AC 50/60 Hz without a built-in suppressor – you'll need to add a snubber or varistor if switching an inductive load. Heat dissipation is 4–5 W at 50/60 Hz, so plan for airflow if mounting several contactors side by side. The IP20 front face protects against accidental touch, but the contactor is open-style for panel mounting.

This contactor is manufactured to IEC 60947-4-1 and 60947-5-1, with UL and CSA certifications. The flame retardance rating is V1 per UL 94, and fire resistance meets 850 °C (1562 °F) per IEC 60695-2-1.

MPN
LC1D65008U7