The Schneider Electric LC1E3210F5 is a 3-pole contactor from the Easy TeSys Control range, rated 32 A in AC-3 utilisation category at ≤440 V, with a 110 V AC 50 Hz coil and one normally open auxiliary contact. AC-3 is the standard duty for squirrel-cage motor switching — starting, stopping, and jogging under load — so this rating directly governs the motor current it can handle. The same contactor also carries AC-1 (resistive load) and AC-3e ratings, covering heater banks or lighting panels where inrush is minimal. The coil pulls in at 110 V AC, 50 Hz only — no dual-frequency or DC coil option here, so verify the control voltage matches your panel's transformer tap.
That depth is measured from the mounting surface to the furthest projection — factor it into gland-plate clearance and enclosure depth when laying out a multi-row panel. IP2X finger protection on the contactor body means it's safe for open-panel mounting inside a locked enclosure, but not for washdown or dust-exposed locations.
Also tested to EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for glow-wire and fire resistance — relevant if the contactor is used inside a household appliance or HVAC unit.