The Schneider Electric LC1E3810M5 is a 3-pole contactor from the Easy TeSys Control range, rated for 38 A in AC-3 and AC-3e duty at up to 440 V. That AC-3 rating means it's sized for squirrel-cage motor switching — the 38 A figure is the current it can make and break under full-load motor starts, not just resistive heating. The 220 V AC 50 Hz coil pulls in reliably across the -20 to 70 °C ambient range at coil voltage, and the built-in 1NO auxiliary contact gives you a feedback or interlock signal without adding a side-mount block.
The IP2X finger-safe front cover is standard, so it meets basic touch protection in an open panel. Non-overlap time between NC and NO contacts is guaranteed at 1.5 ms on both energisation and de-energisation, which matters if you're using the auxiliary for a safety interlock or anti-jog circuit.